Limited version - Red copper Guardian
Body made with full red copper - Ultimate heat-dissipating-efficiency!
This product is for collection only, read below.
Buyer Attention: This model come without reverse polarity protection, the battery must inserted to the right direction(positive towards the diode).This product does not accept any form of returns unless the issue is related to the laser diode. Red copper is a softer copper without mixing any other metals and it can be damaged easily with any kind of impacts. The surface requires constant care and maintenance to prevent oxidation. Buyers must acknowledge these terms before purchasing this model.
Product Specs :
||Red copper 24*84mm with 20mm copper heatsink
||Flat top 18350 li-ion battery
Must follow: positive to the diode, negative to the endcap.
Multi Operation Modes / Electronic Safety Lock
On / off
Multi operations mode
Low power, half power, strobe, full power, SOS and electronics safety lock
Half-press the tail switch to cycle between each mode, the laser driver memorizes and starts with the operation mode that being used for more than three seconds during the last operation
Electronic safety lock
To prevent unauthorized use, half-press the tail switch three times within the first three seconds after the laser is on, the laser will switch to strobe mode before entering the safety lock.
To unlock, half-press five times within the first three seconds after the laser is on and wait another two seconds, if the laser switches to strobe mode then your laser is unlocked.